Multi-Size Sleeve Installers for Sectional Liners

                     

 

Our long experience in the plug manufacturing has been extremely helpful in designing multisize Sleeve Installers. The  Sleeve Installers are the choice of most contractors for their point repair systems; whether it consists of installing cured-in-place (ambient, hot water or steam cure) or mechanical locking sleeves. Sleeve Installers are available up to 50 feet long for 4” through 36” pipes.

In their shorter version, the Sleeve Installers are used as end plugs to process manhole to manhole liners (deformed & reshaped, expanded and CIPP liners).

The Sleeve Installers are made of a two ply cross-biased reinforced rubber sleeve. The rubber sleeve is secured to the end plate through a series of wedging points for a strong and safe attachment.

TECHNICAL SPECIFICATIONS:

Extra Strength Logiball Sleeve Installers
Product # Pipe Size O.D. with pulling heads Length available in 6 inch increments “L” Approx. contact length of rubber with pipe wall By-pass Hose Size Inflation Port
inches inches inches inches
3-6BSI 4
6
3 18″ to 300″ long = 8″ shorter than “L”
= 9″ shorter than “L”
- 1/8
4-8BSI 6
8
4 1/8 18″ to 300″ long = 13″ shorter than “L”
= 15″ shorter than “L”
1/2 1/8
5-10BSI 8
10
5 5/8 24″ to 600″ long = 13″ shorter than “L”
= 16″ shorter than “L”
2 1/4
7-12BSI 10
12
7 5/8 24″ to 600″ long = 15″ shorter than “L”
= 19″ shorter than “L”
2 1/4
9-16BSI 12
15
9.5 27″ to 600″ long = 15″ shorter than “L”
= 21″ shorter than “L”
2 1/2
11-21BXSSI 15
18
21
11.5 30″ to 600″ long = 17″ shorter than “L”
= 22″ shorter than “L”
= 27″ shorter than “L”
2 1/2
13-24BXSSI 18
21
24
13.5 36″ to 600″ long = 19″ shorter than “L”
= 25″ shorter than “L”
= 29″ shorter than “L”
2 1/2
17-30BXSSI 24
27
30
19 54″ to 240″ long = 26″ shorter than “L”
= 32″ shorter than “L”
= 37″ shorter than “L”
2 1/2
19-36BXSSI 27
30
33
36
21 60″ to 240″ long = 25″ shorter than “L”
= 30″ shorter than “L”
= 34″ shorter than “L”
= 38″ shorter than “L”
2 1/2

* Larger by-pass available for 9-16B XSSI and up.

Metric Chart

For cured in place point repairs, we recommend a sleeve installer with a rubber contact length of 2 feet longer than the length of the repair.  Custom made product.

Set of trolleys

 

 

Now available to install
sectional liners in bends of 4″ & 6″

 

 

Set of trolleys to pull the sleeve installer is offered separately.

Contact our sales department to help you choose the proper installer for your application.

Auxiliary equipment and inflation systems are available.

Brochure

 

 

 

Enregistrer

Enregistrer

Enregistrer

Our commitment to safety