Logiball Type “E” Lightweight plugs


A must for submerged pipe, the light, multisize short body Logiball Type “E”  allows to plug small pipes safely from the surface using a pipe handle.  This pipe plug is great for these tight places.

Factory prepared to accept your standard 1/2″ pipe handle.

Strong anchoring chain.

Each plug is tested at the plant at twice the recommended inflation pressure.

Can be used for air or water tests.

Optional remote placement pole assembly available in 6 foot long pole segement.

 

TECHNICAL SPECIFICATIONS:

Logiball Type “E”
Product # Minimum Pipe Bore Maximum Pipe Bore Bypass Size Inflation Pressure Weight Length
inches mm inches mm inches mm P.S.I. KPA lbs kg inches mm
3-5E 3.0 75 5.0 125 1/2 13 40 275 1.5 .7 5.5 138
3.5-6E 3.4 85 6.0 150 1/2 13 40 275 3 1.5 5.5 138
5-8E 5.0 125 8.0 200 1/2 13 35 240 4 2 6.5 163
6-10E 6.0 150 10.0 250 2 50 35 240 7 3 7.5 188
8-12E 7.8 195 12.0 300 2 or 3 50 or 75 35 240 9 4 7.5 188
11-16E Replaced by the Logiplug type “E” (below)

Custom configurations are always possible.

11-16-logiplug-e

11-16 Logiplug Type E

 

 

 

Logiplug Type « E »
Product # Minimum Diameter Maximum Diameter Flow-Thru Inflation Pressure Weight Length
inches mm inches mm inches mm PSI KPA lbs kg inches mm
11-16LPE 11.0 190 16 406 2 50 35 240 22 10 12.5 320

 

 

 

Safety inflation Systems are available.

Tech Tips from NASSCO: Pipe Plug Safety

 

Brochure

 

Our commitment to safety