Logiplug With Large Flow-Thru plugs

LOGIPLUGS

BYPASS PUMPING, FLOW DIVERSION &
FLOW REDUCTION SEWER PLUGS

The Logiplug inflatable plugs are available for pipe sizes 4 to 24 inches.  They can be used in a large variety of applications such as bypass pumping & flow diversion. They can also be used for stopping the flow when the flow-thru is plugged off.

The Logiplug pipe plugs are manufactured on lightweight aluminum mandrels. Steel & stainless steel mandrels are also available. The SBR rubber sleeve is reinforced with two plies of nylon cords. Different elastomers are available.

All Logiplug inflatable plugs are factory tested at inflation pressures corresponding to twice the recommended inflation pressures and shipped with an inspection report and a safety information pamphlet.

 

logiplug7-12lpm

Logiplug 7-12M with 4″ mpt by-pass

placement pole net280

                                

 

 TECHNICAL SPECIFICATIONS:

Logiball Logiplugs
Product # Bypass
Size **
Pipe Size **
Recommended
Inflation Pressure* Outside Diameter Weight Length
inches mm inches mm P.S.I. KPA inches mm lbs kg inches cm
4-8LP 2 MPT 50 4 to 8 100-200 45 310 3.75 94 7 3 22 55
6-10LP 2 FPT 50 6 to 10 150-250 35 240 5.5 138 14 6 18.5 46
7-12LP 3 FPT 75 7 to 12 180-300 35 240 6.5 163 16 7 18.5 46
7-12LPM 4 MPT 100 7 to 12 180-300 35 240 6 152 18 8 22.5 57
9-16LP 4 FPT 100 9 to 16 225-400 30 205 8 200 20 9 18.5 46
12-18LP 4 MPT or 6 MPT 100 or 150 12 to 18 300-450 30 205 10 250 33 15 27.5 70
15-21LP 6 FPT 150 15 to 21 375-525 25 170 14 350 57 32 24 60
18-24LP 6 FPT 150 18 to 24 450-600 25 170 16.5 413 75 34 28 70

* At these pressures, the plugs will make a tight seal and safely withstand a back pressure of 5 P.S.I. or 12 feet
of water in structurally sound and clean pipes.

** Other sizes & configurations are available upon request.

Safety inflation Systems are available.

Brochure

 

 

 

 

Our commitment to safety