Logiball Logiplug inflatable sewer pipe plugs

Info Request

Contact us

USA: (800) 246-5988

Canada: (418) 656-9767


	PRODUCTS

	CUSTOM Design


	TRADE Shows


	DOWNLOAD Center

LOGIPLUG

The LogiPlugs pipe plugs are manufactured on lightweight aluminum mandrels. Steel & stainless steel mandrels are also available. The SBR rubber sleeve is reinforced with two plys of nylon cords. Different elastomers are available.

All LogiPlugs inflatable plugs are factory tested at inflation pressures corresponding to twice the recommended inflation pressures and shipped with its inspection report and its safety information pamphlet.

BYPASS PUMPING, FLOW DIVERSION & FLOW REDUCTION SEWER PLUGS

TECHNICAL SPECIFICATIONS:

Logiball Logiplugs
Product #	By-pass Size **		Pipe Size ** Recommended		Inflation Pressure*		Outside Diameter		Weight		Length
	inches	mm	inches	mm	P.S.I.	KPA	inches	mm	lbs	kg	inches	cm
4-8LP	2 MPT	50	4 to 8	100-200	35	240	3.75	940	7	3	15	37
6-10LP	2 FPT	50	6 to 10	150-250	35	240	5.5	138	14	6	18.5	46
7-12LP	3 FPT	75	7 to 12	180-300	35	240	6.5	163	16	7	18.5	46
9-16LP	4 FPT	100	9 to 16	225-400	30	205	8	200	20	9	18.5	46
12-18LP	8 MPT	200	12 to 15	300-375	30	205	10	250	33	15	27.5	70
15-21LP	6 FPT	150	15 to 21	375-525	25	170	14	350	70	32	24	60
18-24LP	8 FPT	200	18 to 24	450-600	25	170	16.5	413	75	34	28	70

           * At these pressures, the plugs will make a tight seal and safely withstand a back
              pressure of 5 P.S.I. or 12 feet of water in structurally sound and clean pipes.

           ** Other sizes are available upon request.

Safety inflation Systems are available.

Download brochure

A GLOBAL APPROACH TO SAFETY

Home | Products | Company | Info Request | Contact Us