|
|
SELF-CENTERING
REAMER-CUTTER |
|
|
Cut
concrete and clay 6" projecting laterals in less than 5
minutes.
Grind concrete &
stones left in sewer lines up to 75 % full.
Ream calcite
buildups, tuberculations & other accretions.
|
 |
|
|
The 8 inch Self Centering Reamer-Cutter is basically a
hydraulic motor mounted on a set of centering skids which
drives a cutter. An air actuated hydraulic cylinder pushes up
the skids against the pipe wall to center & stabilize the
cutter. A swivel hook is provided inside the cutting head to
winch the cutter through the pipe. Simple and fast, this
cutter can solve problems where others have failed. The skids & cutting
head can be interchanged to ream pipes from 8” to 24”
in
diameter. The cutting tool is powered with water (Jet Cleaner)
or with oil (power pack) by changing the gerotor of the motor.
|
|
|
|
Hole Saw Head |
|
Pipe Size |
inches |
8 |
10 |
12 |
15 |
18 |
21 |
24 |
|
mm |
200 |
250 |
300 |
375 |
450 |
525 |
600 |
|
Hole Saw Head O.D. |
inches |
6.5 |
8.5 |
10.5 |
13.5 |
16.5 |
19.5 |
22.5 |
|
mm |
163 |
213 |
263 |
338 |
413 |
488 |
563 |
|
|
|
| The HOLE SAW
HEAD is the normal tool for most reaming operations. It is
8” long, enough to cut laterals up to 6” in diameter. It
comes with diamond cutters. Carbide cutters are available
by special order. |
 |
|
 |
The Full
Face Cutting Head is made of a center plate on which tool
carrying arms can be mounted. By choosing the proper arm
tools, the user can put together a cutting head for
various sizes and various applications. |
| THE ROOT
SAW: It is a flexible spiral saw used to cut roots and
remove greases. Requires the root saw adaptor block. |
 |
|
 |
Power Pack for
Reamer-Cutter. |
A control panel
for the reamer-cutter is available.
|
